Atop-technology AW5500 User manual Manual de usuario descargar pdf (Pagina 77)

Atop Industrial Wireless Access Point

AW5500

User Manual V. 1.3

 On operation mode choose “Regular AP” (if the device is not in factory default).

 Go to Wireless → Basic Settings; here you can change the Network Name (SSID) to

your preferred name, you might want to first click on “Scan network” to find whether

there are neighbors with a name matching yours (this is done for preventing any conflict

over networks).

 At this point you may decide to change other settings such as the Wireless Mode and

whether to have Automatic Channel Selection.

 Next go to Security Settings, and on Security Mode choose which security protocol will

be used in the network. We strongly recommend not leaving this section as disabled.

 On LAN & WLAN Interfaces, enter the IP Address, Subnet Mask, Default Gateway,

and DNS servers used (if any), according to your network configuration.

 Click “Apply”, and wait for the changes to take effect. You may also want to Save

Settings afterwards just in case you need these configurations in the future.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 103 104

Sin comentarios

Atop-technology AW5500 User manual Manual de usuario Pagina 77