Atop-technology EH7510 User manual Manual de usuario Pagina 31
- Pagina / 120
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
25
Table 2.10
Label
Description
Factory Default
State
Enabled/Disable the PTP function
Unchecked
Version
Set the PTP operation version
1
Clock Mode
PTP (Precision Time Protocol) clock type selection.
End-to-End
Transport
Ethernet (layer 2) multicast transport or layer 3 (UDP/IP)
multicast transports for PTP (Precision Time Protocol)
messages’ selection.
Ethernet
Sync Interval
Set the interval of the sync packet transmitted time
1
Clock
Stratum
To set the Clock Stratum. The lower values take
precedence to be selected as the master clock in the
best master clock algorithm.
3
Clock Class
Clock’s accuracy level, it’s an attribute of an ordinary or
boundary clock; denotes time traceability or frequency
distributed by the grandmaster clock. Please refer to
IEEE 1588-2008, Table 5 for definitions, allowed values,
and interpretation.
248
priority 1
To set the clock priority 1 (PTP version 2). The lower
values take precedence to be selected as the master
clock in the best master clock algorithm.
128
priority 2
To set the clock priority 2 (PTP version 2). The lower
values take precedence to be selected as the master
clock in the best master clock algorithm.
128
UTC Offset
UTC offset value
0
Offset To
Master
The offset time to the master clock
None
Grandmaster
UUID
The grand master UUID for PTP version 1
None
Parent UUID
The parent master UUID for PTP version 1
None
Clock
Identifier
The clock identifier for PTP version 1
None
The lower part of Fig. 2.20 shows how to configure PTP and to see its status per port.
Table 2.11
Label
Description
Factory Default
Port
Port number
None
Enabled
The port mode information, it indicates that the PTP port
function is enabled or disabled.
None
Status
PTP port operation status
None
Mode
Enabled/Disabled PTP port function
Disabled
- User Manual 1
- Important Announcement 2
- Published by 2
- Atop Technologies, Inc 2
- Table of Contents 3
- Preface 7
- Chapter 1: Introduction 8
- Caution 10
- 1.4 Power Requirements 11
- 1.6 LED Indicators 11
- 2.2.2 Console 15
- 2.2.3 Power Status 15
- 2.2.4 Protocol Status 16
- 2.3.2 Password 18
- 2.3.3 IP Settings 19
- 2.3.4 Forwarding and QoS 20
- 2.3.4.1 CoS Mapping 23
- 2.3.4.2 ToS/DiffServ Mapping 24
- 2.3.5 Mirror Port 25
- 2.3.6 System Time and SNTP 26
- 2.3.7 Modbus Setting 27
- 2.3.8 PTP Setting 30
- 2.4 Port 32
- 2.4.1 Port Status 32
- 2.4.2 Port Statistics 33
- 2.4.3 Port Control 34
- 2.5 Trunking 35
- 2.5.1 LACP 35
- 2.5.2 Trunking 36
- 2.6 Unicast/Multicast MAC 37
- Multicast 37
- Unicast 37
- 2.6.1 MAC Address Table 38
- 2.6.2 Add Uni/Multicast MAC 38
- 2.6.3 Filter MAC 39
- 2.7.2 GARP 41
- 2.7.3 GVRP 42
- 2.7.4 GMRP 43
- 2.8 IGMP/IP Multicast 44
- 2.8.2 Static IP Multicast 45
- ＊Example＊ 46
- 2.8.3 IGMP 47
- 2.8.4 IGMP Statistics 48
- 2.9 SNMP 49
- 2.9.1 Community Strings 50
- 2.9.2 Trap Receivers 51
- 2.9.3 SNMPv3 Users 51
- 2.10 Spanning Tree 52
- 2.10.1 Spanning Tree 53
- 2.10.2 Spanning Tree Port 55
- 2.11 VLAN 56
- 2.11.1 VLAN Mode 58
- 2.11.3 VLAN Setting 61
- 2.12.2 Add Static MAC 67
- 2.12.3 802.1x and Radius 68
- 2.12.4 802.1.x 69
- 2.12.5 802.1x Port 70
- 2.13 ERPS/Ring 71
- 2.13.1 DIP Switch 71
- 2.13.2 ERPS 73
- 2.13.3 iA-Ring 79
- 2.13.4 Compatible-Ring 81
- 2.13.5 U-Ring 82
- 2.14 LLDP 84
- 2.14.1 LLDP 84
- 2.14.2 Neighbors 85
- 2.15 System Warning 86
- 2.15.2 Alert Warning Events 88
- 2.15.3 SMTP Settings 89
- 2.16 Diagnosis 90
- 2.17 System Log 92
- 2.17.1 Syslog 92
- 2.17.2 Event Log 93
- 2.18 System 95
- 2.18.1 Backup/Restore 95
- 2.18.3 TFTP 97
- 2.18.5 Reboot 99
- 3.1 Serial Console Setup 100
- 3.3 General Command 103
- 3.4 Command Example 103
- 4.1 SwitchView 106
- 4.2 Firmware Upgrade 107
- 4.3 Topology Diagram 108
- System Information 109
- Console Information 110
- Power Information 110
- IP Information 110
- System Status Clear 111
- Warning Events Information 111
- Port Status 111
- Redundancy Information 115
- Glossary 119
Relacionado con productos y manuales para Hardware De La Computadora Atop-technology EH7510 User manual
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales