Atop-technology MB5416A2 User manual Manual de usuario descargar pdf (Pagina 33)

Atop Modbus Gateway

MB54XX-X Series

User’s Manual V 1.1

3.5.5 TCP Settings

Settings for representing a Modbus TCP connection using the internet are set here. First go

to Basic Settings ↔ TCP Settings, then proceed to choose whether to enable TCP ticking on

the “Enable” box.

Fig. 3. 14

 TCP Slave: When on this mode, the device will run on Slave mode and wait to receive

Modbus requests from the Master; data transmission is done under a Modbus TCP

format.

 Remote IP Address shows the device’s slave node IP address.

 TCP Port shows the device’s slave node TCP port.

 VCOM inactivity’s Time Out can be set as well (which is the period of time allowed

between actions), with a maximum of 600 minutes or 10 hours. If no action has been

taken after this period, Modbus TCP connection will be automatically terminated by the

system.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 83 84

Sin comentarios

Atop-technology MB5416A2 User manual Manual de usuario Pagina 33