Atop-technology SE8502-M12 User Manual Manual de usuario descargar pdf (Pagina 22)

User manual Version 1.1

SE8502-M12 IP68 Serial Server

Fig 23. TCP Client in Link mode

3.4.4. UDP Mode

SE8502-M12 can be configured in a UDP mode to establish connection using Unicast or Multicast data from the

serial device to one or multiple host computers. Vice versa is also true. For example, the original RS-422/ RS485 bus

can be transferred and extended connected distance by SE8502-M12s.

The destination IP is assigned by single IP or group IPs, The configuration is limited by the Local Listening Port. For

example, on SE8502-M12 listening port is 4660 which receive data sending from the host computers. SE8502-M12

can support up to 8-group IPs for UDP connection, if users needed.

Fig 24. UDP protocol in Link mode

 Note: In this phase, UDP mode does not support Virtual COM mode.

3.4.5. Serial Settings

This filed can be configured with serial parameters for SE8502-M12. Here User can configure Serial parameters,

include UART Mode, baud rate, parity, data bit and type of flow control.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 61 62

Sin comentarios

Atop-technology SE8502-M12 User Manual Manual de usuario Pagina 22