Atop-technology SW550XC User manual Manual de usuario descargar pdf (Pagina 37)

Industrial Wireless Serial Device Server Series

SW550xC User Manual V 1.0

4.5.3 Advanced Settings

Provides details on wireless network parameters for performance tuning. Changes in this

section may affect overall performance, so caution is recommended, if you are not clear of

what you are doing please refrain from altering them, Figure 4.16.

Figure 4.16

 Radio Off – When enabled, this allows the user to turn off the wireless completely.

 Fast Handoff – Atop’s proprietary protocol to speed up roaming between AW5500s in

addition to Fast Roaming. Enable to allow AW5500 to share its neighboring AW5500

information to SW550xC to further reduce its roaming time.

 Fast Roaming – Enable to allow SW550xC to scan for available Access Points in the

background to speed up roaming when necessary.

 Roaming Threshold – Determine when SW550xC should try to connect to another

Access Point when the wireless signal falls below the selected range.

 Tx Power – is the SW550xC’s Transmission Power; the transmission power can be

reduced to prevent wireless interference to other wireless networks.

 STP – The Spanning Tree Protocol is only available in the AP Client mode. Enable this

option if STP is enabled in your network to prevent network loops by setting up the

Forward Delay time.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 123 124

Sin comentarios

Atop-technology SW550XC User manual Manual de usuario Pagina 37