Atop-technology SE5001A User manual Manual de usuario descargar pdf (Pagina 22)

User Manual Version 1.0

SE5001A Serial Device Server

3.2.6. Configure SE5001A as TCP Client

Figure 3.8 Link Mode: TCP Client Setup

 Type 2 in the “Input choice(1~5) and enter：“

 Input destination IP in the “Please input Destination IP：”

 Input destination port in the “Please input Destination port：”

 Select TCP connection behavior: 1 for connect always, 2 for connect on serial data

If 2 is selected, console will prompt for additional configurations.

 Input idle time to disconnect in the “Please input idle time to disconnect(0sec , 1~255)：” (Input 0 to

disable; Input 2 to disconnect TCP connection after 2 seconds of serial Inactivity)

 Input error retrying time in “Please input waiting time for error retrying(0 minute,1~255)：” (Input 0

to disable; Input 2 to try to connect to a TCP Server every 2 minutes)

 Input idle time in “Please input idle time to send TCP alive packet(x*10sec)：”(Input 2 to the send TCP

keep alive packet every 20 seconds)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Sin comentarios

Atop-technology SE5001A User manual Manual de usuario Pagina 22