Atop-technology SE5001A User manual Manual de usuario descargar pdf (Pagina 29)

User Manual Version 1.0

SE5001A Serial Device Server

3.2.13. Accept Control Command from COM port

SE5001A can also accept serial control commands (RFC2217) directly from the COM port. For more details and

information about this function, please contact our Technical Support.

3.2.14. Backup EEPROM to Flash

Select “5” from “Input choice and enter (0~5):” the following screen should appear (Figure 3.16):

Figure 3.16 Backup EEPROM to Flash

 Type 1 from “Input choice and enter (0~2):” to back up the settings from the EEPROM to the Flash.

SE5001A would then show “EEPROM Backup (Yes)”.

 Type 2 from “Input choice and enter (0~2):” to erase the settings stored in the Flash. SE5001A would

then show “EEPROM Backup (No)”.

3.3 Configuration Using Web Browser

1. Make sure the PC is located in the same network sub-net as SE5001A

2. Open a web browser, then Enter in the IP address of SE5001A. Default user name is admin and default

password is null (leave it blank).

3. SE5001A’s network, link mode and COM ports settings can be configured in different web pages.

4. Click “Save Configuration” to save settings.

5. Click ”Restart” button in “System” link to make the change effective if necessary.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Sin comentarios

Atop-technology SE5001A User manual Manual de usuario Pagina 29