Atop-technology SE5002 User manual Manual de usuario descargar pdf (Pagina 37)

User manual Version 1.3

ABLELink

Ethernet Serial Server SE5002

- 36 -

7.2 Using SerialManager Configuration Utility Program

Use SerialManager configuration program on the product CD to check the status of SE5002. The status and

version can be read from the tool.

For example, ‘S’ means that COM1 is in server mode and is not connected.

7.3 Using TCPTEST.EXE or TCPTEST2.EXE Sample Program

Sample programs TCPTEST.EXE and TCPTEST2.EXE can be used to check the status of SE5002. Refer to

chapter 6.2 for running the sample programs.

Appendix A: Specification

A.1. Hardware Specification

Specifications

CPU

y 16-bit Embedded CPU

y 100MHz

Flash Memory

y 512K Bytes

SDRAM

y 512K Bytes

EEPROM

y 512 Bytes

Host Communication

y IEEE802.3 base band

y TCP/IP, UDP, SNMP, HTTP, Telnet, ARP, BOOTP, DHCP, ICMP

Reset

y Built-in default key to restore factory default settings

Watch Dog Timer

y Software watch dog to auto reset

Serial Port

Communication

y Two RS-232 or RS-485/RS-422 selectable

y RS-232: EIA-RS-232C standard, Full Duplex, DB9

y RS-485: 2/4 wires, Half/Full duplex, Terminal Block

y RS-422: 4 wires, Half/Full duplex, Terminal Block

y Parameters

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Sin comentarios

Atop-technology SE5002 User manual Manual de usuario Pagina 37