Atop-technology SE5416A User manual Manual de usuario Pagina 60

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 113
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 59
Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
60
Note: It is not possible to configure LAN1 or LAN2 when bridge mode is enabled. Please go to
the Bridge Settings instead.
6.5.2 DNS Settings
You can configure the DNS1 or DNS2 Server IP Address manually. Alternatively, if you enable
the DHCP option in LAN 1 Settings”, SE5416A Series will retrieve the DNS server address
from the DHCP server automatically.
Operation: Main [2]Networking [3]DNS Settings
Figure 6.6
6.5.3 SNMP Settings
SE5416A Series allows the user to Enable or Disable the SNMP function. The changes will
become effective immediately. Basic SNMP configurations such as Read/Write Community,
SysName (System Name), SysLocation (System Location), SysContact (System Contact),
and SNMP Trap Server IP are supported.
Operation: Main [2]Networking [5]SNMP Settings
Vista de pagina 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 112 113

Comentarios a estos manuales

Sin comentarios